Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MEA226D Mapping and Delivery Guide
Inspect aircraft electronic systems and components

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency MEA226D - Inspect aircraft electronic systems and components
Description This unit of competency is part of the Avionic Certificate IV (Aircraft Maintenance Stream) training pathways. It covers the competencies required to inspect electronic systems and components of fixed and rotary wing aircraft. The unit is used in workplaces that operate under the airworthiness regulatory systems of the ADF and CASA. Where a CASA licensing outcome is sought this unit forms part of the CASA requirement for the granting of the B2 maintenance certification licence under CASR Part 66, in accordance with the licensing provisions in Section 3, Assessment Guidelines.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application This unit requires application of hand skills and the use of system/component knowledge and applicable maintenance publications to inspect aircraft electronic systems and components.Applications include fixed and rotary wing aircraft.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites MEA246C Fabricate and/or repair aircraft electrical components or parts
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Inspect electronic systems and components
  • Isolation tags are checked and aircraft configured for safe system inspection and operation in accordance with the applicable maintenance manual
  • Electronic system components are visually or physically checked for external signs of defects in accordance with applicable maintenance manual
  • Defects are correctly identified and recorded in accordance with standard enterprise procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to inspect aircraft electronic systems and components while observing all relevant safety precautions.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The underlying skills inherent in this unit should be transferable across a range of inspection applications (including the timely involvement of supervisors or other trades) associated with aircraft electronic systems and components. It is essential that cleanliness requirements and safety precautions applicable to the system being maintained are fully observed, understood and complied with. Ability to interpret inspection procedures and specifications (allowable limits) and apply them in practice is critical.

Evidence of transferability of skills and knowledge related to inspection is essential. This is to be demonstrated through application across a range of electronic systems and components listed in the Range Statement. The work plan should take account of applicable safety and quality requirements in accordance with the industry and regulatory standards.

A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements of the unit of competency are being achieved under routine supervision on each type of system listed in Groups 1 to 7 in the Range Statement and at least one component for each listed system type (Groups 6 and 7 may be omitted where they are not applicable to the enterprise). This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry Evidence Guide.

Context of and specific resources for assessment

Competency should be assessed in the workplace or simulated workplace using tools and equipment specified in the maintenance manuals. It is also expected that general and special purpose tools, test and ground support equipment would be used where appropriate.

Method of assessment

Guidance information for assessment

Individuals being assessed who have already attained any of MEA214C Inspect, test and troubleshoot aircraft basic communication and radio navigation systems and components, MEA215C Inspect, test and troubleshoot advanced aircraft communications systems and components, MEA216C Inspect, test and troubleshoot instrument landing systems and components, MEA220C Inspect, test and troubleshoot Inspect, test and troubleshoot aircraft primary radar systems and components, and MEA221C Inspect, test and troubleshoot aircraft secondary radar systems and components, MEA233C Inspect, test and troubleshoot aircraft inertial navigation and reference systems and components, and MEA234C Inspect, test and troubleshoot aircraft global navigation systems and components, will have covered a significant proportion of the Performance Criteria for Element 1 and will have covered Range Statement variables applicable to the unit. Log of Industrial Experience and Achievement records relating to MEA214C Inspect, test and troubleshoot aircraft basic communication and radio navigation systems and components, MEA215C Inspect, test and troubleshoot advanced aircraft communications systems and components, MEA216C Inspect, test and troubleshoot instrument landing systems and components, MEA220C Inspect, test and troubleshoot Inspect, test and troubleshoot aircraft primary radar systems and components and MEA221C Inspect, test and troubleshoot aircraft secondary radar systems and components, MEA233C Inspect, test and troubleshoot aircraft inertial navigation and reference systems and components, MEA234C Inspect, test and troubleshoot aircraft global navigation systems and components, MEA276A Maintain basic aircraft communication and radio navigation systems and components, MEA278A Inspect, test and troubleshoot instrument display systems and components, and MEA289A Maintain basic light aircraft avionic systems and components, may be accepted as also meeting the evidence requirements for this unit in the applicable areas.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Look for evidence that confirms knowledge of:

component attachment methods and connection of hardware

the basic layout (block diagram level) and operation of:

multi-function display systems (interface units, display generators and display units), i.e. HUD, ICAS, FMS, ACARS, EFIS and ECAM

integrated modular avionics

INS and IRS

external communications systems:

HF

UHF

VHF

SATCOM

ELT

internal communications systems:

intercommunication

cabin intercommunication data systems

cabin network services

CVR

information systems, such as air traffic and information management systems, and network server systems

RF navigation systems:

ILS

VOR

ADF

GNS

primary radar (navigation/weather) components and interface

ACAS components and interface

radio altimeter components and interface

DME components and interface

ATC transponders

relevant OHS practices

maintenance requirements

relevant maintenance manuals

relevant regulatory requirements and standard procedures

Look for evidence that confirms skills in:

applying relevant OHS practices

using approved maintenance documentation and aircraft publications relating to the avionic system being maintained

recognition of system and component defects/external damage, correct installation, connection of plugs, terminations, and attaching hardware (including cabling/harnesses) and security in:

multi-function display systems (interface units, display generators and display units), i.e. HUD, EICAS, FMS, ACARS, EFIS and ECAM

integrated modular avionics

INS and IRS

external communications systems:

HF

UHF

VHF

SATCOM

ELT

internal communications systems:

intercommunication

cabin intercommunication data systems

cabin network services

CVR

information systems, such as air traffic and information management systems, and network server systems

RF navigation systems:

ILS

VOR

ADF

GNS

primary radar (navigation/weather) components and interface

ACAS components and interface

radio altimeter components and interface

DME components and interface

ATC transponders

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Note

Range statements listed below are numbered to facilitate specification of the assessment requirements included in the Evidence Guide

Electronic systems and components

Electronic systems and components include:

1. Electronic instrument displays – EFIS, EICAS, FMS, ECAM and HUD (where applicable to enterprise)

2. Instrument navigation systems – INS, IRS, compasses and AHRS

3. Communication systems – HF, VHF, UHF, SATCOM, intercom, data and cabin network services, ELT and CVR

4. Radio navigation systems – ADF, VOR, ILS and GNS

5. Pulse operated systems – weather radar, navigation radar, ATC transponder, RADALT, DME, doppler and ACAS (where applicable to enterprise)

6. Integrated modular avionics (where applicable to enterprise)

7. Information systems – air traffic and information management, network servers (where applicable to enterprise)

Application

Application of this unit may relate to:

scheduled or unscheduled maintenance activities

individual or team-related activities

Procedures and requirements

Refer to industry standard procedures specified by manufacturers, regulatory authorities or the enterprise

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Isolation tags are checked and aircraft configured for safe system inspection and operation in accordance with the applicable maintenance manual 
Electronic system components are visually or physically checked for external signs of defects in accordance with applicable maintenance manual 
Defects are correctly identified and recorded in accordance with standard enterprise procedures 

Forms

Assessment Cover Sheet

MEA226D - Inspect aircraft electronic systems and components
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MEA226D - Inspect aircraft electronic systems and components

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: